Success...this is my second hack on X8D Assan hack module for Futaba 7C but this time I'm not using any switch. Just direct hack. Cut all 3 wires as the second picture from below and connect to Assan hack module respectively. That's it. All working. For those who interested to use switch please use diagram from the first picture. It's super easy.
Posts
8 comments:
Hello! you made the discovery, also applies to FM Futaba 7C or be possible?
Best Regards from Portugal
Ok, it supported PCM and PPM in 2.4ghz mode?....
any PPM based radio can be installed with this system..
This is not PCM based system..pure digital PPM..PCM is based on secret company codes..so any PCM code only belong to one company..PPM is open..
Thanks Ahmad! exelente! I have already ordered the module, I am going to make the switch because I do not want to lose the 35Mhz, I prefer to have both systems! :))
Best Regards from Portugal...
once you've tasted the 2.4G I beleived 35Mhz is bye bye..really 2.4G is the way to go nowaday. I never look back to my 35mhz. All my fleet equip with assan. 12 all them. :D
Hi. Ahmad is done! :) look, http://yfrog.com/1713297854j and de logo FUTASSAN :) lolololo thanks for everything buddy!
B.Regards....
Those Diagrams look familiar. Glade it work out for you Slumberjer.
Later,
Omaha_RC_Flyer
do you have any info on the ppm output of the 7c 2.4 ghz? only reason i ask is that i have a flysky 2.4 module out of my old transmitter that i'd like to hook up so i can use all the flysky receivers in addition to the futaba fasst system. I'm guessing maybe the trainer port still puts out a ppm signal maybe?
Post a Comment