Tuesday, June 23, 2009

EPP zagi





I've been looking for EPP zagi for quite a while and finally got one. This is Windrider BeEvolution..I been fed-up with standard polystyrene zagi that easily total during hard crash..so here it is my EPP zagi..wing span 45'.

Not yet finish with the project..take it as slow and steady..It takes quite a lot of time and energy to assemble since all part comes pretty much apart..

My Setup:
3500kv turnigy motor prop 5x5
40A esc
2 x HXT standard servo

hope to maiden this week..at peremba.

Thursday, June 18, 2009

My Field Box and Starter

Just wanted to share my field box and starter.

This is my field box..custom made to make it simple and practical for my needs. I wanted my field box to be small and light and just enough to fill all the things that I have for my 600N.

For my starter..just a small modification needd so it can run on Lipo..No fancy modification just cut the wire and solder to a male dean connecter. Just becarefull with +ve and -ve pole so that you starter rotate in the right direction.

That's it you have a portable engine starter.




Spartan DS760 Gyro on 600N


This gyro is the easiest setup ever. I just follow bob finless video once..and that is..very simple setup and all it takes only 2-3 minutes and my 600 ready to fly.

All I can say this gyro rock..I felt very confident with it when doing 3D manuever. It hold my 600N tail solid. Piro rate on both direction is consistent. No drift..felt like flying in my RFG4.5 sim. I'm no hard 3D flyer but all I can say, I'm very satisfied so far with this gyro. No fancy monitor and very light. Setup just a breeze away. Highly recomended. If you have extra money then spartan is really a good upgrade from good old 401.

600 Nitro header tank

Some say no need to install a header tank on 600N some say it is a must..a much debatable issue for 600Nitro flyers..It seems the design of the tank is very2 weird. I'm having difficulty to make the fuel clunk reaching every corner of the tank. No matter how I do it but still cannot have full reach all the ends. Then I bought the K&S flex fuel tube which seems to be working very well. This fuel tube is not like normal silicon fuel tube. It has super flexible part which allow to move freely inside the tank without pinching the tube.

But at the end, I have decided to install header tank on my 600N for safety and ease of mind. Here it is my header tank on 600N.




Saturday, June 6, 2009

Flasher 600N

The following video is just a boring video of me flying my 600N. Nothing fancy 3D just a normal forward flight and some piro. The sun shine pretty hard from the left so I'm flying my 600N to the right which is quite limited. At the end of the video I was quite nervous since I forgot the shade behind me and almost hit it.

The setup work..KDS800 gyro can be used on 600N. Look at the piro rate. Nice holding and stop. However I'm planing to install state of the art gyro on my machine. I'm interested with Spartan DS760, Align GP750, GY520 but still under my intensive research of which to choose.

Update: Spartan DS760 is on the way..wuhu..

Warning!!! this video will make you bored to death.